beautypg.com

Wayne-Dalton TORSION SPRING 9100 User Manual

Page 17

background image

17

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Tools Needed:

Tools Needed:

INST

ALLA

TION

NOTE: If you have a model 9600 Series
door with windows in the top section or
9100 Sonoma (8’ high), skip this step
and complete step 9.

NOTE: Model 9100 Series door over 13’
wide require a 3” U-Bar (supplied).

Place the 3” u-bar over the top rib.
Fasten each end of the u-bar to the
endstile with (2) 1/4”- 20 x 11/16” self
drilling screws.

Fasten center of the u-bar as shown
to the rib using (2) 1/4”- 14 x 5/8” self
tapping screws 6” to the left and 6”
inches to the right of the center of the
door section.

NOTE: Upon completion of this step,
continue with Step 10.

NOTE: If a 3” U-Bar was installed in step
8, skip this step.

NOTE: Model 9600 glazed top doors
13’-0” wide or greater will be supplied
with a 3” asymmetrical u-bar for the top
section.

Place the 3” asymmetrical u-bar over the
top rib. Fasten each end of the u-bar to
the endstile with (2) 1/4”- 20 x 11/16”
self drilling screws.

Fasten center of the u-bar as shown
to the rib using (2) 1/4”- 14 x 5/8” self
tapping screws 6” off of the center of the
door section.

Fasten both walls of the u-bar as shown
using 1/4”- 14 x 5/8” self tapping screws
every 30-36 inches. (approximately 18
self tapping screws per 18’ u-bar)

U-Bar

U-Bar - Asymmetrical

(4) 1/4”- 20 X 11/16”

SELF DRILLING SCREWS

Power Drill

7/16” Socket

Driver

Power Drill

7/16” Socket

Driver

8

9

U-BAR

OPERATOR

BRACKET

(INSTALLED IN

STEP 10)

TOP DOOR SECTION

6”

6”

ATTACHING CENTER OF U-BAR

ATTACHING ENDS OF U-BAR

(2) 1/4”- 20 X 11/16”

SELF DRILLING SCREWS

1/4”- 14 X 5/8” SELF

TAPPING SCREWS

U-BAR

OPERATOR

BRACKET

(INSTALLED IN

STEP 10)

TOP DOOR SECTION

30” TO 36”

6”

6”

ATTACHING CENTER OF U-BAR

ATTACHING INTERMEDIATES OF U-BAR

This manual is related to the following products: