Wayne-Dalton 8850 - Manual (Page 17)

17
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
iNST
alla
Tio
N
16
Align the stationary spring cone(s) with
the holes in the center bearing bracket.
Secure the spring(s) to the center bearing
bracket with (2) 3/8”- 16 x 1-1/2” hex
head bolts and (2) 3/8”- 16 nuts.
imPoRTaNT: SPRINGS UNDER TENSION
CAN BE DANGEROUS.
imPoRTaNT: ThE SPRING WARNING
TAG(S) SUPPLIED MUST BE SECURELY
ATTAChED TO ThE STATIONARY SPRING
CONE IN PLAIN VIEW. ShOULD A
REPLACEMENT SPRING WARNING TAG BE
REqUIRED, CONTACT WAYNE-DALTON
CORP. fOR fREE REPLACEMENTS.
attaching Torsion Springs to
center bearing bracket
TORSION
SPRING
TORSION
SPRING
TORSION
SPRING
CENTER BEARING
BRACKET
STATIONARY
SPRING CONE
STATIONARY
SPRING CONE
9/16” Socket
Ratchet Wrench
9/16” Wrench
(2) 3/8” X 1-1/2”
hEX hEAD BOLTS
5/16” X 1- 5/8” LAG SCREWS
(2) 3/8” NUTS
AND WAShERS
hEADER
CENTER BEARING
BRACKET