BenQ-Siemens M81 - Manual (Page 14)

13 Getting started
right page (13) of EF81 FUG en, A31008-H2640-A1-3-7619 (27.04.2006, 13:51)
© Sie
m
ens AG 20
03, \
\Itl.eu
\c
ot
tbus\
Proj
ekte_30\
Ben
Q
_M
obi
le\
EF81
_KESTR
EL_1
\out-
Template:
X75,
Version 2
.2;
VAR La
ngu
age: en; VAR
issue d
ate
: 06
0317
Getting started
Your phone's displays are covered
with a protective film. Remove this
film slowly before using the phone.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting the SIMcard/
Micro SD card
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
The Micro SD Card gives your phone
a very large memory capacity. This
allows you to save picture/video files
and sound recordings, for example.
However, you can also use this Micro
SD Card like a floppy disk to save any
other files.
You can access the list of folders and
files in the My stuff menu (page 101).
If you assign a file from the Micro SD
Card to a function in the phone such
as a ringtone, the file is copied to the
phone memory.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards
1
. Ensure that the
chamfered corner is in the correct
position.
• Place the Micro SD Card in front of
the slot
2
.
Attention
Insert the SIM card before inserting the
Micro SD Card.When the Micro SD Card is
wrongly inserted into the SIM card slot, it
cannot be removed!
New Micro SD Card
• Create a backup copy of the data on the
old Micro SD Card on a PC.
• Format the new Micro SD Card.
• Copy the data from the PC onto the new
Micro SD Card.