Watlow MINICHEF Convection Oven Application - Manual (Page 8)

6 ■ Wa t l o w M I N I C H E F 2 0 0 0 A p p l i c a t i o n 7
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Menu 1
B Menu 2
C Menu 3
D Menu 4
E Menu 5
F Menu 6
Start-up
Apply power to the oven.
[`idle] will appear on the display.
If the Real Time Clock Display option is installed and [setUp] / [time] is pro-
grammed, the time of day will appear on the display.
Preheat
If the [Ready] parameter under the [SEtUP] function in the Configuration Mode is set
to yes, the controller will detect temperatures and preheat to operating temperature
(above the relative set point minus the ready band) as required.
• Press the key for the menu you want to run. Each key selects a different menu. You
can select from up to six menus that control temperature and cooking time. Only
one menu may be run at a time.
Note: The controller will not respond if you select an invalid menu (one for which the total of Time 1, Time 2, Time 3,
and Time 4 is set to 0).
The menu you have chosen becomes the current menu for controller operation. Until
the menu is completed or canceled, the indicator light above the menu key will light
up (flashing or steady) to indicate the active menu.
• If the oven is not at operating temperature, it will preheat. Meanwhile:
The word [pre-`] [`Heat] will appear on the display for a few moments. The
menu key indicator light will flash slowly. The temperature of Channel 1 will be dis-
played until the operating temperature is reached.
A B
D E
C
F
G H
M INI C HEF 2000
[`idle]
Edit Accept
Back-Up Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D E
C
F
M INI C HEF 2000
[100f`]
Edit Accept
Back-Up Exit
B
D E
C
F
M INI C HEF 2000
[ready]
Edit Accept
Back-Up Exit
G H G H
A A
[pre-`] [`Heat]