Watlow MINICHEF Convection Oven Application - Manual (Page 18)

1 6 ■ Wa t l o w M I N I C H E F 2 0 0 0 A p p l i c a t i o n 8
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Not Used
B Not Used
C Menu Increment
D Menu Select
E Start/Stop
F Menu Decrement
Start-up
Apply power to the oven.
[`idle] will appear on the display.
If the Real Time Clock Display option is installed and [setUp] / [time] is pro-
grammed, the time of day will appear on the display.
Select a Menu
1. Press the Menu Select Key
The controller will display the currently selected menu. If no menus have been pro-
grammed the word [`nonE] will appear on the display.
2. Press the Up or Down key until the menu you want appears on the display.
The controller will only display valid menus (those for which the total of Time1,
Time 2, Time 3 and Time 4 for the menu is set to greater than 0).
3. Press the Menu Select key or press the Start/Stop key.
If you press the Menu/Select key, [`idle] appears on the display and the menu
you have chosen becomes the current menu for controller operation.
If you press the Start/Stop key the menu will start (see the “Run a Menu” instruc-
tions elsewhere in this section)
Preheat
If the [Ready] parameter under the [SEtUP] function in the Configuration Mode is
set to yes, the controller will detect temperatures and preheat to operating temperature
(above the relative set point minus the ready band) as required.
D E
C
F
M INI C HEF 2000
[````1]
Edit Accept
Back-Up Exit
D E
C
F
M INI C HEF 2000
[````9]
Edit Accept
Back-Up Exit
A B
G H
A B
G H
D E
C
F
M INI C HEF 2000
[`idle]
Edit Accept
Back-Up Exit
A B
G H