Vivotek IP7251 - Manual (Page 57)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 57
System log
This section explains how to configure the Network Camera to send system log to remote server
as a backup� It is composed of the following two columns: Remote Log and Current Log�
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log
backup. Before utilizing this feature, it is suggested to install a log-recording tool to receive
system log messages from the Network Camera. For example, a tool -- Kiwi Syslog Daemon.
Visit
http://www�kiwisyslog�com/kiwi-syslog-daemon-overview/ �
Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3� When completed, select Enable remote log and click Save to take effect�
Current Log
This column displays the system’s log in chronological order� The system log is stored in the
Network Camera’s buffer area and will be overwritten when reaching a certain amount�