Vivotek IP7251 - Manual (Page 105)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 105
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie
in the GET and POST should be the same to be recognized as a pair for one session. The contents of
upstream should be base64 encoded to be able to pass through some proxy server.
This channel will help to transfer the raw data of UART over network.
PARAMETER VALUE DESCRIPTION
channel 0 ~ (n-1) The channel number of UART.
Get SDP of Streamings
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the
“subgroup of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET method.
Open the network streamings
Note: This request requires viewer access privilege