Viking SLAL - Manual (Page 31)

fIGURE 127
SECTION TSM 288 ISSUE A PAGE 31 OF 36
6.0 sPECIfICaTIONs
6.1 ClEaRaNCE CHaRT
Metric Clearances ( x 0.1 mm)
Pump
Model
sides front back Mesh
Min Max Min Max Min Max Nominal
SLAS 1.0 1.8 1.0 1.3 0.8 1.6 1.5
SLAL 1.0 1.8 1.1 1.4 1.1 1.9 1.5
SLBS 1.4 2.2 1.1 1.4 0.9 1.8 1.8
SLBL 1.6 2.4 1.4 1.7 1.3 2.2 1.8
SLCS 1.5 2.5 1.4 1.7 1.2 2.0 2.2
SLCL 1.7 2.7 1.6 1.9 1.4 2.2 2.2
SLDS 2.0 3.0 1.8 2.2 1.2 2.2 2.5
SLDL 2.2 3.2 2.1 2.5 2.0 3.0 2.5
SLES 1.8 3.2 2.0 2.5 2.1 3.1 3.0
SLEL 1.8 3.0 2.1 2.6 2.2 3.2 3.0
SLFS 2.4 3.5 2.8 3.3 2.7 3.7 4.0
SLFL 3.0 4.0 2.9 3.6 2.9 3.8 4.0
SLGS 10.0 12.2 4.0 6.0 3.0 5.5 4.0
SLGL 10.0 12.0 4.5 6.5 3.5 6.0 11.0
Imperial Clearances ( x 0.01 in)
Pump
Model
sides front back Mesh
Min Max Min Max Min Max Nominal
SLAS 0.39 0.71 0.39 0.51 0.31 0.63 0.59
SLAL 0.39 0.71 0.43 0.55 0.43 0.75 0.59
SLBS 0.55 0.87 0.43 0.55 0.35 0.71 0.71
SLBL 0.63 0.94 0.55 0.67 0.51 0.87 0.71
SLCS 0.59 0.98 0.55 0.67 0.47 0.79 0.87
SLCL 0.67 1.06 0.63 0.75 0.55 0.87 0.87
SLDS 0.79 1.18 0.71 0.87 0.47 0.87 0.98
SLDL 0.87 1.26 0.83 0.98 0.79 1.18 0.98
SLES 0.71 1.26 0.79 0.98 0.83 1.22 1.18
SLEL 0.71 1.18 0.83 1.02 0.87 1.26 1.18
SLFS 0.94 1.38 1.10 1.30 1.06 1.46 1.57
SLFL 1.18 1.57 1.14 1.42 1.14 1.50 1.57
SLGS 3.94 4.80 1.57 2.36 1.18 2.17 1.57
SLGL 3.94 4.72 1.77 2.56 1.38 2.36 4.33