Figure 3-15 . rs-232 control system connection, 15. rs-232 control system connection, Pre l iminar y – Vidikron 85 User Manual
Page 45
Vidikron Vision 85 Owner’s Operating Manual
33
PRE
L
IMINAR
Y
Connecting a PC or
Automation System to the
VHD Controller
Use a straight-through, 9-pin RS-232 cable to connect a PC or home theater
control/automation system (if present) to the RS-232 Control port on the VHD Controller; see
Figure 3-15.
For more information about using this connection, refer to Serial Communications on
page 67.
Figure 3-15. RS-232 Control System Connection
Pb
Pr
Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
1
2
TRIGGERS
RS-232 Out
Component Video
1
2
3
4
5
7
8
9
6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)