Install lens motor, Figure 3-8 . autoscope lens motor installation, Iminar – Vidikron 85 User Manual

Page 37: 8. autoscope lens motor installation, Pre l iminar y

Text mode
Original mode

Vidikron Vision 85 Owner’s Operating Manual

PRE

IMINAR

Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the six remaining 10-32 x 1/2” Pan-Head
Phillips screws (item #2).

Figure 3-8. AutoScope Lens Motor Installation

After you have installed the AutoScope lens motor, proceed with Mounting the Vision 85 on
page 27.