Vantec UGT-IS100R - Manual (Page 21)

7. Follow the on-screen instructions to complete the
installation.
UGT-IS100R
Page 21
For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up
to Windows.
2. Please insert the CD driver bound with 4+1 SATA II 300
IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier
into your CD-ROM Drive.
3. At the Windows desktop, click
Start, then Run.
4. Type
D:\
UGT-IS100R\XP_2003_Vista\setup.exe , click
OK.
(Change
D:\ to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the
installation.
6. Restart Windows to complete the installation.
To Verify Driver Installation
1. Right click
My Computer and click Manage.
2. Select
Device Manager.
3. Look for the following:
Windows® 2000/XP/2003: Double click SCSI and RAID