Vantec UGT-IS100R - Manual (Page 13)

UGT-IS100R
Page 13
F
up. During this (POST) process, the BIOS will show up and
indicate the devices attached to it.
Driver Installation
For Windows® 2000, XP and Server 2003
or A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “ UGT-IS100R\2000_XP_2003_Vista\Floppy32 ” folder,
found on the driver CD, onto a blank floppy disk then follow
the directions below.
1. Setup the RAID Array prior to Windows installation.
2. Follow Microsoft’s Windows installation procedure.
3. At the Windows Setup screen, press F6 to install the RAID
driver.
4. When prompted, press
S to specify the location of the driver.
5. Insert the floppy disk, then press
Enter.
6. Select
(Windows 2000) RAID Driver for JMicron JMB363
Controller or (Windows XP/2003) RAID/AHCI Driver for
JMicron JMB36X Controller, then press Enter.
7. Press
Enter to finish driver installation, then follow the