Vantec UGT-IS100R - Manual (Page 20)

UGT-IS100R
Page 20
F
into your CD-ROM Drive.
3. At the Windows desktop, click
Start, then Run.
4. Type
D:\
UGT-IS100R\2000_XP_2003_Vista\setup.exe , click
OK. (Change D:\ to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the
installation.
6. Restart Windows to complete the installation.
For Windows® Server 2008/7 (64-bit)
or New Installation
1. Setup the RAID Array prior to Windows installation.
2. Follow Microsoft’s Windows installation procedure.
3. At the Windows Setup screen, press
Load Driver to install
the RAID driver.
4. Please insert the CD driver bound with 4+1 SATA II 300
IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier
into your CD-ROM Drive, click
Browse.
5. Click on the Plus (+) sign next to the CD-ROM Drive, double
click the “ UGT-IS100R\XP_2003_Vista\Floppy64 ” folder,
then click OK.
6. Select
JMicron JMB36X Controller, then press Next.