Vantec UGT-IS100R User Manual
Page 14
UGT-IS100R
Page 14
on-screen instructions to complete the Windows installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up
to Windows.
2. Please insert the CD driver bound with 4+1 SATA II 300
IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier
into your CD-ROM Drive.
3.
At the Windows desktop, click
Start, then Run.
4. Type
D:\
UGT-IS100R\2000_XP_2003_Vista\setup.exe
, click
OK. (Change D:\ to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the
installation.
6.
Restart Windows to complete the installation.
For Windows® XP-x64/Server 2003-x64
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
UGT-IS100R\XP_2003_Vista\Floppy64
” folder, found
on the driver CD, onto a blank floppy disk then follow the