Vantec UGT-IS100R - Manual (Page 11)

UGT-IS100R
Page 11
Delete RAID Disk Drive
1. As the BIOS boots press
Ctrl+J when prompted to enter the
RAID BIOS.
2. At the next screen select Delete RAID Disk Drive, press
Enter.
3. Please use arrow keys
↑ and ↓to select the array you want to
delete, use the “space” key to mark the selected array, then
press
DEL.
4. When asked
ALL DATA ON THE RAID WILL LOST!! ARE
YOU SURE TO DELETE (Y/N), press Y to accept.
Solve Mirror Conflict
When a RAID set is created, then metadata written to the disk
includes drive connection information. If, after a disk failure, the
replacement disk was previously part of a RAID set (or used in
another system), it may have conflicting metadata. If so, this will
prohibit the RAID set from being either created or rebuilt, in order
for the RAID set to function properly, this old metadata must be
first overwritten with the new metadata. To resolve this, from the
main BIOS window select
Solve Mirror Conflict, then press
Enter, the correct metadata, including the correct drive