M-AUDIO Delta RBUS - Manual (Page 9)

After completion of the driver installation, Windows may require you to
restart Windows. If it does request a restart, remove the Drivers CD Disk
from the CD drive and respond “Yes.” The system will restart and your
Delta R-BUS is ready for play.
Windows 95 Installation
1. After installation of the Delta R-BUS hardware, boot your system and
start Windows. During the Windows boot procedure, new hardware
will be automatically detected.
2. Choose the Install of "driver from disk provided by hardware
manufacturer," then click OK.
3. An ‘Install From Disk’ will prompt you to copy files from the A:\
drive. Insert the Driver software CD into your CD ROM drive. Type
in the drive letter of your CD drive (we will assume here that it is D:\)
and the path to the Delta drivers, which will be D:\Delta
Series\Delta9x. Click ‘Next>’.
4. Windows will start to copy files, with a progress indicator on the
screen. Once this process completes itself, your Delta R-BUS will be
ready for action.
After completion of the driver installation, Windows may require you to
restart Windows. If it does request a restart, remove the Drivers CD Disk
from the CD drive and respond “Yes”. The system will restart and your
Delta R-BUS is ready for play.
Windows NT Installation
1. Power up your computer after physically installing the Delta R-BUS
interface card.
2. Go to Start | Settings | Control Panel and double click on
‘Multimedia.’
3. Click the ‘Devices’ tab, then click the ‘Add’ button.
4. “Unlisted or Updated Driver" will be highlighted at the top of the
list. Click OK.
5. The ‘Install Driver’ box will prompt you to insert the driver disk,
and the A: prompt will appear as the path. Insert the Drivers CD
into your CD ROM drive. Type in the drive letter of your CD drive
(we will assume here that it is D:\) and the path to the Delta drivers,
which will be D:\Delta Series\Delta_nt. Click OK.
6. The "M Audio Delta Interface Card" driver will appear in the Add
Unlisted or Updated Driver dialog box. Click OK.
7. Windows NT will require you to restart your computer for the
changes to take effect. Choose "Restart Now." Upon restart, your
Delta R-BUS will be ready for use.
9