Delta driver software installation – M-AUDIO Delta RBUS User Manual
Page 7
7. Screw the Delta R-BUS PCI host card’s metal bracket down into the
bracket hole on the back of your computer using the screw you
removed in step 5 above.
8. Place the cover back on your computer.
Now it is time to connect the Delta R-BUS’s breakout cable to the PCI host
card that you have just installed. Never attach the break-out cable with
the computer turned on. Doing so could damage the PCI card, and void
your warranty. Similarly, you should power down your computer before
attaching your R-BUS device to the 25-pin connector. With your
computer turned off:
1.
Unwrap the Delta R-BUS breakout cable. Locate the 15-pin D-sub
connector on the Delta R-BUS PCI Host card.
2.
Connect D-sub end of the breakout cable to the 15-pin D-sub connector
on the Delta R-BUS PCI Host card that now resides in your computer.
Delta Driver Software Installation
The Delta R-BUS system includes a driver CD for Windows
95/98/NT/ME/ 2000 and Macintosh, containing all Windows drivers,
Macintosh drivers, and Delta Control Panel software. To install these on
your system, please follow these steps:
Windows 2000 Installation
1. After installing the Delta R-BUS hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will
be automatically detected by the Found New Hardware Wizard.
Click ‘Next>’.
2. The ‘Found New Hardware Wizard’ will now ask how you want to
find the driver. "Search for the best driver for your device" is already
selected. Click ‘Next>’.
3. Windows will give you a selection of locations to search. Make sure
that only “Choose a Path” is checked, or click on the check box to do
so. Insert the Driver CD into your CD ROM drive. Type in the drive
letter of your CD drive (we will assume here that it is D:\) and the
path to the Delta drivers, which will be D:\Delta Series\Wdm. Click
‘Next>’.
4. The ‘Wizard’ reports that its Windows driver file search has found the
M Audio Delta R-BUS. Click Next>.
5. Windows is now ready to install the driver files from the specified
location. Click Next>. Windows will start to copy the files and show
you a progress report screen.
7