M-AUDIO Delta RBUS - Manual (Page 8)

6. The Wizard reports that Windows has finished installing the software.
Click ‘Finish’. Your Delta R-BUS is ready for action.
After completion of the driver installation, Windows may require you to
restart Windows. If it does request a restart, remove the Drivers CD Disk
from the CD drive and respond “Yes.” The system will restart and your
Delta R-BUS is ready for play.
Windows ME or 98 Installation
1. After installing the Delta R-BUS hardware, boot your system and
start Windows. During the Windows boot procedure, new hardware
will be automatically detected by the Add New Hardware Wizard as
shown here. Click ‘Next>’.
2. The ‘Add New Hardware Wizard’ will now ask how you want to
find the driver. "Search for the best driver for your device" is
already selected. Click ‘Next>’.
3. Windows will give you a selection of locations to search. Make sure
that only “Choose a Path” is checked, or click on the check box to do
so. Insert the Driver CD into your CD ROM drive. Type in the drive
letter of your CD drive (we will assume here that it is D:\) and the
path to the Delta drivers, which will be D:\Delta Series\Delta9x.
Click ‘Next>’.
4. The ‘Wizard’ reports that its Windows driver file search has found
the M Audio Delta R-BUS. Click Next>.
5. Windows is now ready to install the driver files from the specified
location. Click ‘Next>’. Windows will start to copy the files and
show you a progress report screen.
6. The Wizard reports that Windows has finished installing the software.
Click ‘Finish’. Your Delta R-BUS is ready for action.
8