VXI VM4016 - Manual (Page 87)

www.vxitech.com
VM4016 Command Dictionary 87
SYSTem:ERRor?
Purpose
Queries the Error Queue
Type Required SCPI command
Command Syntax
None – query only
Command Parameters
N/A
*RST Value N/A
Query Syntax
SYSTem:ERRor?
Query Parameters None
Query Response
ASCII string
Description The System Error query is used to retrieve error messages from the error queue. The
error queue will maintain the two error messages. If additional errors occur, the queue
will overflow and the second and subsequent error messages will be lost. In the case of
an overflow, an overflow message will replace the second error message. See the SCPI
standard Volume 2: Command Reference for details on errors and reporting them.
Refer to the “Error Messages” section of this manual for specific details regarding the
reported errors.
Examples Command / Query Response (Description)
SYST:ERR? -350, “Queue overflow”
Related Commands
None