Input:mask – VXI VM4016 User Manual

Page 27

Text mode
Original mode

www.vxitech.com

VM4016 Programming

INPUT:MASK

The INPut:MASK command enables or disables input channels from generating interrupts or
recording data in the conditional register. If a channel is programmed to be ON or 1, then it is
enabled to generate interrupts. If a channel is programmed to be OFF or 0, then it cannot generate
VXIbus interrupts.

INPut:MASK ,

Where is 0 | OFF | 1 | ON.

Where is standard channel
list format supporting channels 1 through
16.

EXAMPLES

INPut:MASK ON,(@1:8)

Enables channels 1 through 8 to generate
interrupts.

INPut:MASK? 3

Reports that channel 3 is enabled for

1 voltage

comparison.

INP:MASK? 9

Reports that channel 9 is not enabled for

0 voltage

comparison.