Vizio L30 WGUe - Manual (Page 11)

VIZIO L30 WGUe User Guide
Version - 4/7/2005 10
1.10.1 - Key Remote Control Functions
1. SETUP – This button starts all programming sequences.
2. Remote LED – Blinks when the remote is being programmed or is
sending a signal to your LCD display.
3. POWER – Press this key to turn the LCD display on from standby
mode. Press it again to return to the standby mode.
4. AUX – This button selects a programmed component.
5. CBL – This button selects a programmed cable TV set-top box or selects a programmed
satellite TV set-top box.
6. VCR – This button selects a programmed VCR.
7. TV – This button selects a programmed TV. Pre-programmed for the VIZIO L30 WGUe
LCD TV.
8.
Number Button Pad – These buttons select a channel or
password.
9. MUTE – This button turns the sound on and off.
10. 100/Enter – This button enters a channel number greater than 100
in TV mode. Additionally, it works as an ENTER button in other
video modes.
11. VOL (+ or -) – These buttons turn volume up or down.
12. LAST – This button recalls the previously viewed channel.
13. INPUT – This button changes the input source.
14. CH (+ or -) – These buttons change the channels up or down.
15. WIDE/GUIDE – This button cycles through standard and
widescreen viewing modes or accesses programming guides, such
as the one that comes with a satellite dish. GUIDE does not work
in TV mode.
16. FAV/EXIT – This button exits the component, guide or OSD
menus. Note: The FAV feature is not available on the L30 WGUe.
dcfe - These buttons navigate the on-screen display (OSD)
menus.
17. SELECT – This button works to select your chosen options in on-screen display (OSD)
menus.
18. INFO – This button turns the image and system information display on or off.
19. MENU – This button is used to turn the OSD on or off.