VXI VT1422A - Manual (Page 311)

VT1422A Command Reference 309 Chapter 7
MEMory
MEMory:VME:ADDRess
MEMory:VME:ADDRess <A24_address> sets the A24 address of the VME
memory card to be used as additional reading storage.
Parameters
Comments •
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
•
The default (if MEM:VME:ADDR not executed) is 240000
16
.
•
The parameter may be specified in decimal, hex (#H), octal
(#Q), or binary (#B).
•
Related Commands: MEMory subsystem, FORMat, and FETCH?
•
*RST Condition: VME memory address starts at 200000
16
. When using an
Agilent/HP E1405B/06A command module, the first VT1422A occupies
200000
16
- 23FFFF
16
.
Usage MEM:VME:ADDR #H400000
Set the address for the VME memory card
to be used as reading storage
MEMory:VME:ADDRess?
MEMory:VME:ADDRess? returns the address specified for the VME memory card
used for reading storage.
Comments •
Returned Value: numeric.
•
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
•
Related Commands: MEMory subsystem, FORMat, and FETCH?
Usage MEM:VME:ADDR?
Returns the address of the VME
memory card.
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
A24_address numeric valid A24 address none