Connect the power and telephone cords, Place the phone on the wall, Connect the base ac adapter to the – Uniden DECT2188 Series User Manual
Page 4: Jack and the telephone cord to the, Jack. route the cords as shown, For desktop use for wall mount use
For wall mount use only
On the front of the base, pull
the clip (that holds the corded
handset in place) out of its slot.
Rotate the clip 180 degrees.
Flip it from front to back and slide it back into the slot.
Connect the power and telephone cords
Connect the base AC adapter to the
AC IN 7.8V
jack and the
telephone cord to the
TEL LINE
jack. Route the cords as shown:
For desktop use
For wall mount use
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
Plug the AC adapter into a standard 120 V AC power outlet, and
connect the telephone cord to a standard telephone wall jack.
Place the phone on the wall
Place the mounting slots over the pins on the wall plate, and slide the
base down
to lock it
into place.
1.
2.
3.
1.
2.
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
This manual is related to the following products: