Uniden DECT2188 Series - Manual (Page 25)

How to operate your answering system
To... From the base
From a handset (remote
operation)
play new
messages
Press PLAY/STOP Press MESSAGES/MUTE .
The system announces the number of new & old messages,
then plays the first new message followed by the day & time
it was received. Then the system plays the new messages
in the order they were received.
restart the
current message Press
PHONEBOOK/LEFT . Press 1 or select 1:Repeat.
replay previous
messages
Press PHONEBOOK/LEFT
repeatedly until you hear the
message you want to replay.
Press 1 or select 1:Repeat
repeatedly until you hear the
message you want to replay.
skip a message Press CALLEr ID/rIGHT . Press 3 or select 3:Skip.
delete a message While the message is
playing, press DELETE .
While the message is playing,
press 4 or select 4:Delete.
delete all of your
messages
With the phone in standby,
press DELETE . When the
system asks you to confirm,
press DELETE again.
Not available.
play old
messages
After the system plays the new messages,
press
PLAY/STOP again. press 2 or select 2:Play.
end the
operation
Press PLAY/STOP . Press END .
Screening Your Calls
Another feature your answering system gives you is call screening.
While the system is taking a message, you can hear the caller on the
base speaker (if you turn on Call Screen) or from a handset.
To... From the base From a handset
hear the caller
leaving a message
Just listen to the caller over
the speaker.
Press MESSAGES/MUTE .
answer the call Pick up the corded handset. Press TALK/FLASH .
mute the call screen
without answering Press
CLEAr/MUTE .
Press END or return the
handset to the cradle.