Uniden DECT2188 Series - Manual (Page 13)

Area Code Enter your area code so the phone hides the area code on
incoming local calls (see "Using Seven-digit Dialing" on p. 14).
Dial Mode Change the way your phone communicates with the telephone
network (see "Changing from Tone to Pulse Dialing" on p. 4).
Set Line
Mode
Do not change this setting unless instructed to by customer
service.
Call Blocking
This menu lets you block unwanted calls from up to 20 phone
numbers and manage your call block list (see p. 19).
Entering Text on Your Phone
When you want to enter text into your phone (for example, a name
in the phonebook), use the twelve-key dial pad to enter the letters
printed on the number keys. Here's how it works:
The phone enters the letters in the order they appear on the key.
For example, if you press the number key 2 once, the phone
enters the letter A. Press 2 twice for B, and three times for C.
If you press the key again after the last letter, the phone starts the
same letter sequence with small letters. If you press 2 four times
in a row, the phone enters a (small letter). Press 2 five times for b,
and six times for c.
If you see the icon [Aa] in the display, the phone enters capital
letters first (A B C), then small letters (a b c), then the number on
the key (2). The icon [aA] means the phone starts at the small
letters, so it enters small letters first, then the number on the key,
then capital letters.
The phone automatically uses a capital letter for the first letter and
any letter right after a space; all other times, it uses small letters.
If two letters in a row use the same number key, enter the first
letter, then use CaLLer ID/rIGHT to move the cursor to the next
position to enter the second letter.
Switch between capital
& small letters
Press .
Move the cursor
Press PHONEBOOK/LEFT to move the cursor to the left
or CALLEr ID/rIGHT to move the cursor to the right.
Leave a blank space Press POUND (#) .




