Uniden DECT2188 Series - Manual (Page 16)

Dialing from the Caller ID list
Find the entry you want to dial.
If the number is a toll or long distance call, but there's no 1 at the
front of the CID record, press to add the 1.
On the handset, press
TaLk/FLasH to dial the number. On the base,
pick up the corded handset.
(You can also press TaLk/FLasH or pick up the corded handset before
opening the CID list. Find the number you want to dial, then press
MeNu/seLeCT .)
Caller ID menu options
With the phone in standby, open the CID list and find the number you
want. Press MeNu/seLeCT to open the Caller ID menu; choose one of
these options:
Delete Entry Erase this Caller ID number.
Store Into Pb
Add this number to this station's phonebook. The phone
prompts you to enter a name & edit the number; cordless
handsets also prompt you to choose a personal ring.
Delete All
Erase this station's CID list. (This does not affect the CID
lists saved on any other stations.)
Add Call Block (Handset only) Add this number to your call block list (see
page 19).
Using Call Waiting
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received for the waiting call. Press FLasH ( TaLk/
FLasH on a handset) to switch between your current call and the
waiting call; remember, each time you switch, there is a short pause
before you're connected to the other caller.
Using Seven-Digit Dialing
If you can make a local call by dialing only seven digits instead of ten,
you can tell the phone to hide your local area code in the CID list.
Do not enter an area code if your phone company requires ten-
digit dialing. You might not be able to dial from the CID list.
1.
2.
3.