Uniden DECT2188 Series - Manual (Page 17)

With the phone in standby, open the menu and select Global
Setup, then select Area Code.
Use the number keypad (
0 - 9 ) to enter your three-digit area code.
Press MeNu/seLeCT when you’re finished.
The phone uses the programmed code as a filter. When calls
come in, the phone compares the area code to the programmed
one. If they match, the phone hides the area code in the CID list.
While reviewing the list, press # to toggle the area code off & on.
Using the Phonebook
Each station can store up to 70 entries in its phonebook.
Open/close the phonebook Press PHONEBOOK.
Scroll through the entries
Press DOWN to scroll through the phonebook
from A to Z or UP to scroll from Z to A.
Jump to entries that start
with a certain letter
Press the number key corresponding to the
letter you want to jump to.
Dial an entry
Find the entry you want to dial.
On a handset, press TALK/FLASH . On the
base, pick up the corded handset.
1.
2.
Phonebook menu options
Open the phonebook with the phone in standby, then press MeNu/
seLeCT to open the phonebook menu. Choose one of these options:
Create
New
Add an entry to your phonebook. The phone will prompt you to
enter the name & phone number. (Cordless handsets will also
prompt you to choose a personal ring.)
Copy
All
Copy the whole phonebook to another station. (You must have at
least one accessory handset to use this multi-station feature.)
Delete
All
Erase all the entries in this station's phonebook. (This does not
affect the entries saved on any other stations.)
Phonebook entry options
With the phone in standby, open the phonebook and find the entry
you want. Press MeNu/seLeCT to open the individual phonebook entry
menu. Choose one of these options:
1.
2.
3.

