Uniden DECT2188 Series - Manual (Page 24)

Record Time
Set the amount of time callers have to leave a message,
either 1 minute or 4 minutes. Choose Announce Only if
you don't want the system to let callers to leave a message.
Message Alert
Have the system beep every 15 seconds when you have
a new message; the beeping stops when you listen to all
your new messages. (To mute the alert without listening to
your messages, press any key on the base.)
Ans. Language Change the language of the system's voice prompts.
Call Screen
Turn on the call screen feature so you can hear callers as
they leave messages on the base speaker (see page 23).
Ans. On/off
Turn your answering system on or off. (To turn your
system on or off from the base, just press ON/OFF .)
Getting Your Messages
Accessing your answering system from a handset
You can access your system from a handset whenever the phone is
in standby.
During remote operation, the phone beeps to let you know it's
waiting for your next command.
You can press the number key next to the commands instead of
scrolling through them.
If you don't press any keys for 30 seconds, the phone returns to
standby.
Only one handset can access the system at a time.




5:Stop
[ / /select]
Press
MESSAGES/MUTE
to start
remote operation mode.
Press MENU/
SELECT to choose
the current option.
Press END to exit remote
operation mode.
1:Repeat
2:Play 3:Skip
4:Delete 6:SelectGreeting
8:RecNewGreeting
Use
PHONEBOOK/
LEFT
to go to the
previous option.
Use
CALLER ID/
RIGHT
to go to the
next option.
5:Stop
[ / /select]
Press
MESSAGES/MUTE
to start
remote operation mode.
Press MENU/
SELECT to choose
the current option.
Press END to exit remote
operation mode.
1:Repeat
2:Play 3:Skip
4:Delete 6:SelectGreeting
8:RecNewGreeting
Use
PHONEBOOK/
LEFT
to go to the
previous option.
Use
CALLER ID/
RIGHT
to go to the
next option.