Uniden DECT2188 Series - Manual (Page 30)

this problem. The technician who installed your DSL service might
have left some filters for you; if not, call your DSL provider or look in
any electronics store.
Plug the DSL filter into the telephone wall
jack and plug your phone’s base into the
filter. Make a test call to make sure the
noise is gone.
resetting and registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
Press & hold END and # until the
System Reset menu appears
(about 5 seconds).
Select Deregister HS. The display
lists all registered handsets.
Select the handset you want to
reset.
When the phone asks you to
confirm, select Yes. The handset
clears its information from the base
& deletes it own link to the base.
1.
2.
3.
4.
Press & hold END and # until the
System Reset menu appears
(about 5 seconds).
Select Base Unavailable.
When the phone asks you to
confirm, select Yes. The handset
deletes its own link without
contacting the base.
1.
2.
3.
When you reset a handset (or if you buy a new one), that handset
displays a Handset Not Registered message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select Register Handset. The
display should say Handset Registering.
On the handset you want to register, press and hold
pouND (#) until
the handset display says Handset Registering (about 2 seconds).
In about 30 seconds, the handset display should say Registration
Complete. Press TaLk/FLasH and make sure you get a dial tone.
1.
2.
3.
DSL filter
Telephone
cord
Telephone
wall jack
DSL filter
Telephone
cord
Telephone
wall jack