Uniden DECT2188 Series - Manual (Page 3)

Installing Your Phone
Set Up the Base
Attach the stand
Before you attach the stand, you have to decide if you want the
phone to rest on a desk or hang on a wall.
For desktop use
Turn the stand so the
word Desk is right-side
up (it will be on the
right).
Insert the tabs into
the notches marked
Desk at the top of the
base.
Press in on the latch
and slip it into the
notch.
For wall mount use
Turn the stand so the
word WaLL is right-
side up (it will be on
the right).
Insert the tabs into
the notches marked
WaLL at the bottom of
the base.
Press in on the latch
and slip it into the notch.
To remove the stand
Press in on the latch and slide it out of the notch.
Connect the corded handset
Use the coiled cord to connect the
corded handset to the connector on
the left side of the base.
1.
2.
3.
1.
2.
3.
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL
DESK
WALL