UTStarcom PN-820 - Manual (Page 216)

214
C
H
8
TIP
MAKE YOUR DEVICE DISCOVERABLE
To receive beamed information, beaming devices or computers must
be able to detect your device.
1 In the Home screen, press [Start], select
Settings, press O [OK].
2 Scroll to Connections and press O [OK].
3 Select Bluetooth, press right soft key > [Menu]
select Devices and press O [OK].
4 Use left and right Navigation Keys to select
Discoverable and press [Done].
Other Bluetooth-enabled devices can now detect your phone and
attempt to beam information to it, establish a Bluetooth partnership, or
use a Bluetooth service.
Selecting Discoverable also turns on Bluetooth.
Turning off Bluetooth will make your device not discoverable,
and it will also prevent you from sending a Bluetooth beam.
See also
End a Bluetooth partnership
Create a Bluetooth partnership
RENAME A BLUETOOTH PARTNERSHIP
You can give a more meaningful name to a Bluetooth partnership to
help you recognize it when selecting from a list of partnerships.
1 In the Home screen, press [Start], select
Settings, press O [OK].
2 Scroll to Connections and press O [OK].
3 Select Bluetooth, press right soft key > [Menu]
select Devices and press O [OK].
4 Select the Bluetooth partnership to rename.
5 Press [Menu] then Rename.
6 In Name, enter a new name for the Bluetooth
partnership, and press [Done].
See also
Make your device discoverable
Turn Bluetooth on and off
End a Bluetooth partnership
Create a Bluetooth partnership
BLUETOOTH BLUETOOTH