beautypg.com

Toshiba P200 Series User Manual

Page 55

background image

User’s Manual

3-7

Getting Started

Starting Hibernation Mode

To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Click the arrow button (

) in the power management buttons

(

).

3. Select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernate Mode automatically

when you press the power button or close the lid. In order to define these

settings, you can follow the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Maintenance and click Power Options.
3. Click Choose what the Power Button do or Choose what closing

the lid does.

4. Enable the desired Hibernation Mode settings for When I press the

power button or When I close the lid.

5. Click the Save Changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer takes a

moment to save the current data in memory to the hard disk drive. During

this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved

to the hard disk drive, turn off the power to any peripheral devices.

You can also enable Hibernation Mode by pressing Fn + F4 - please refer

to Chapter 6,

The Keyboard

, for further details.

Do not turn the computer or devices back on immediately. Wait a moment

to let all capacitors fully discharge.