Toshiba P200 Series User Manual
Page 155
User’s Manual
10-12
Troubleshooting
Sleep/Hibernation
Memory expansion
, for information on installing
memory modules.
Modem
Problem
Procedure
The system will not
enter Sleep/Hibernation
Is Windows Media Player open? The system
might not enter Sleep/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select Sleep/
Hibernation.
If problems persist, contact your dealer.
Problem
Procedure
The computer hangs up
and issues beep
sounds. (A long beep,
three short beeps, three
short beeps, and then a
long beep.)
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adapter and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adapter.
6. Turn on the power.
If problems persist, contact your dealer.
Problem
Procedure
Communication
software can't initialize
the modem
Make sure the computer's internal modem
settings are correct. Refer to Phone and Modem
Options Properties in the Control Panel.
You can hear a dial tone
but can't make a call
If the call is going through a PBX machine, make
sure the communication application's tone dial
detection feature is disabled.
You place a call, but a
connection can't be
made
Make sure the settings are correct in your
communications application.