Toshiba PSA20 - Manual (Page 67)

3-9
G
ETTING
S
TARTED
Starting Hibernation
NOTE: You can also enable Hibernation by pressing Fn + F4 . See
Chapter 5, The Keyboard , for details.
To enter Hibernation mode, follow the steps below.
1. Click start .
2. Select Turn Off Computer .
3. Open the Turn Off Computer dialog box. Hibernate is not displayed.
4. Press the Shift key. The Standby item will change to Hibernate .
5. Select Hibernate .
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press the power
button or close the lid. First, however, make the appropriate settings according to
the steps below.
1. Open the Control Panel .
2. Open Performance and Maintenance and open TOSHIBA Power
Saver .
3. Select the Hibernate window, select the Enable Hibernate support check
box and click the Apply button.
4. Select the Power Save Modes window.
5. Double-click Power Mode (Full Power, Normal, etc.) and open the
System Power Mode window.
6. Enable the desired Hibernation settings for When I press the power
button and When I close the lid .
7. Click the OK button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a moment to
save current memory data to the hard disk. During this time, the
Disk indicator will
light.
After you turn off the computer and memory is saved to the hard disk, turn off the
power to any peripheral devices.
Turning off the power