Connecting a tv, Changing the resolution, Tv -14 – Toshiba PSA20 User Manual
Page 150: Connecting a tv -14 changing the resolution -14
User's Manual
8-14
O
PTIONAL
D
EVICES
TV
You can connect a television set to the TV out port on the computer. Follow the
steps below.
Connecting a TV
1.
Turn the computer off.
2. Use a video cable (not supplied) to connect the TV adaptor cable’s mini-jack
to the TV out port on the computer.
3.
Connect the TV adaptor cable’s RCA jack to the RCA jack on the TV.
4. Turn the television on.
5.
Turn the computer on.
You can use the hotkeys
Fn + F5
to change the display device. Refer to Chapter 5,
NOTE: If a television is connected to the computer, set the TV type in
Display Properties. Follow the steps below.
a.
Click
start
and click
Control Panel
.
b.
Double-click the
Display
icon to open the Display Properties
window.
c.
Click the
Settings
tab and click the
Advanced
button.
d.
Click the
nView Display Mode
tab, click
Device Settings
and
click
Select Output Device
.
e.
Select
Advanced
and select
TV
in the
Device Selection
window.
f.
Select the
Format
box and select the format that your TV supports.
Changing the resolution
After you connect a TV (NTSC), follow the steps below to set the Display resolu-
tion to 640 x 480.
1. Open
Display properties
and select the
Settings
tab.