TP-Link TL-WA5110G - Manual (Page 63)

55
Figure 4-55 Ping Watch Dog Utility
¾ Enable : Turn on/off Ping Watch Dog.
¾ IP Address : The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.
¾ Interval : Time internal between two ping packets which are sent out continuously.
¾ Delay : Time delay before first ping packet is sent out when the device is restarted.
¾ Fail Count: Upper limit of the ping packet the device can drop continuously. If this value is
overrun, the device will restart automatically.
Be sure to click the Submit button to make your settings in operation.
4.13.6 Speed Test
The Speed Test is dedicated for testing the connection speed to and from any reachable IP
address on current network, especially when we are building wireless network between devices
which are far away from each other. It should be used for the preliminary throughput estimation
between two network devices. The estimation is rough. You can input the remote device's
administrator Username and Password under Advance options to get a precise estimation if the
remote device is TL-WA5110G too.