TP-Link TL-WA5110G - Manual (Page 40)

32
Figure 4-21 Wireless Throughput
Rate - The Throughput unit.
Run Time - How long this function is running.
Transmit - Wireless transmit rate information.
Receive - Wireless receive rate information.
Click the Start button to start wireless throughput monitor.
Click the Stop button to stop wireless throughput monitor.
4.7 DHCP
Figure 4-22 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-22): DHCP Settings,
DHCP Clients List
and Address Reservation. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
4.7.1 DHCP Settings
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which