TP-Link TL-WA5110G - Manual (Page 30)

22
Figure 4-11 Wireless Settings in AP Client Router mode
¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all
wireless devices in your network. The default SSID is TP-LINK_xxxxxx (xxxxxx indicates the
last six unique characters of each device’s MAC address). This value is case-sensitive. For
example, TP-LINK is NOT the same as tp-link.
¾ Region -Select your region from the drop-down list. This filed specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
¾ Channel – This field determines which operating frequency will be used. It is not necessary
to change the wireless channel unless you notice problems with another nearby access
point.
¾ Mode - Select the desired wireless mode. The options are:
•
54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
router.
•
11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.
Be sure to click the Save button to save your settings on this page.
)
Note:
The device will reboot automatically after you click the Save button.
4.6.2 Wireless Mode
This page allows you to configure the wireless mode for your device: