TP-Link TL-WA5110G - Manual (Page 11)

3
¾ Supports PPPoE, Dynamic IP, Static IP Internet Access.
¾ Built-in NAT and DHCP server supporting static IP address distributing.
¾ Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
¾ Supports Virtual Server, Special Application and DMZ host.
¾ Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address
filtering.
¾ Provides WLAN ACL (Access Control List).
¾ Supports configuration backup/restore and firmware upgrade.
¾ Supports Web management.
1.3 Conventions
The AP or TL-WA5110G, or device mentioned in this User guide stands for TL-WA5110G 54M
High Power Wireless Access Point without any explanations.
Parameters provided in the pictures are just references for setting up the product, which may
differ from the actual situation.
You can set the parameters according to your demand.