beautypg.com

Adjusting the picture, Using cableclear, Dnr (digital noise reduction) – Toshiba 27HLV95 User Manual

Page 70: Selecting the color temperature, Adjusting the back lighting feature, Continued)

background image

Chapter 8: Using the TV’s features

70

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

(E) 27HLV95 *Web 213 : 276

Using CableClear

®

/DNR (digital noise

reduction)

The CableClear

®

digital noise reduction feature allows you to

reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal (especially
a Cable channel) or playing a noisy video cassette or disc.

To select CableClear/DNR preferences:

1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.

3. Press

z to highlight the CableClear/DNR field, and then

press

x • to make a selection.

Picture Settings

Advanced Picture Settings

Theater Settings

Video

Done

CableClear

Auto

Color Temperature

Back Lighting

Cool

Dynamic Contrast

On

MPEG Noise Reduction

Low

Reset

ANT 1

Advanced Picture Settings

100

Note:

• For the current inputs Antenna, Video 1, or Video 2, the menu

will display the text “CableClear.” If the signal is analog, the
available selections are Off, Low, Middle, High, and Auto. If
the signal is digital, the menu will display the text “CableClear”
and will be “grayed out” with “Off” selected.

• For the current inputs built-in DVD, ColorStream HD, or

HDMI, the menu will display the text “DNR.” If the video
resolution is 480i, the available selections are Off, Low,
Middle, High, and Auto. If the video resolution is 1080i, the
available selections are Off, Low, and High. If the video
resolution is anything other than 480i or 1080i, the menu will
display the text “DNR” and will be “grayed out” with “Off”
selected.

4. To save the new settings, highlight Done and press

ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.

Adjusting the picture

(continued)

Selecting the color temperature

You can change the quality of the picture by selecting from three preset
color temperatures (cool, medium, and warm), as described below.

To select the color temperature:

1. Press MENU and open the Video menu.
2. Highlight Advanced

Picture Settings and
press ENTER.

3. Press

z to highlight

the Color Temperature
field, and then press

x • to select the mode you prefer

(Cool, Medium, or Warm).

Done

CableClear

Auto

Back Lighting

Dynamic Contrast

On

MPEG Noise Reduction

Low

Reset

ANT 1

Advanced Picture Settings

100

Color Temperature

Cool

4. To save the new settings, highlight Done and press

ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.

Note: If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change the color temperature
mode, the picture mode automatically changes to Preference in
the Picture Settings menu.

Adjusting the back lighting feature

You can use the back lighting feature to adjust the screen
brightness for improved picture clarity.

To adjust the back lighting:

1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press

z to highlight Back Lighting, and then press x • to

adjust the screen brightness (0-100).

ANT 1

Advanced Picture Settings

Done

CableClear

Auto

Color Temperature

Back Lighting

Cool

Dynamic Contrast

On

Reset

100

MPEG Noise Reduction

Off

4. To save the new settings, highlight Done and press

ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.

Mode

Picture Quality

Cool

blueish

Medium

neutral

Warm

reddish

Advanced Picture Settings

Picture Settings

Theater Settings

Video

Advanced Picture Settings

#01E_069-076_27HLV95

05.10.6, 11:04 AM

70

Black