Tv back panel connections – Toshiba 27HLV95 User Manual

Page 13

(E) 27HLV95 *Web 213 : 276

___________

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

CableCARD is a trademark of Cable Television Laboratories, Inc.

TV back panel connections

1 ANT-1 (CABLE) IN and ANT-2 IN — Two inputs that

support analog (NTSC) and digital (ATSC) off-air antenna
signals and analog and digital (QAM) Cable TV signals.

Note: If you have an antenna only, connect it to ANT-1. If you have
both cable TV and an antenna, connect the cable TV to ANT-1 and
the antenna to ANT-2.

2 VIDEO-1 IN — Standard (composite) video and standard

audio inputs plus optional S-video input for connecting
devices with composite video or S-video output.

Note: Standard (composite) video and S-video cables carry
only video information; separate audio cables are required for a
complete connection.

3 ColorStream

— ColorStream

high-definition

component video and standard stereo audio inputs for
connecting devices with component video output, such as a
Toshiba DVD player with ColorStream

. See pages 18 and 19.

Note: Component video cables carry only video information;
separate audio cables are required for a complete connection.

4 A/V OUT — Standard composite video and analog audio

outputs for connecting a VCR for editing and dubbing. See
page 20 for details.

5 DIGITAL AUDIO OUT — Optical audio output in Dolby

Digital/Surround or PCM (pulse-code modulation) format
for connecting an external Dolby Digital decoder, amplifier,

A/V receiver, or home theater system with optical audio
input. See page 22.

6 G-LINK™ — For use with one of the enclosed IR blaster/

G-LINK

™

cables to enable the TV Guide On Screen

™

recording features. See page 23.

7 Variable Audio OUT — Standard analog audio outputs

for connecting an analog amplifier with external speakers.
See page 22.

8 HDMI™

— High-Definition Multimedia Interface input

receives digital audio and uncompressed digital video from
an HDMI device or uncompressed digital video from a DVI
device. See page 21.

9 CableCARD™ slot — For use with a digital security card and

digital cable TV service (provided by your local cable operator) to
view encrypted digital programming. See pages 15 and 44.

0 PC IN — For use when connecting a personal computer

(PC). See page 24.

!¡ PC/HDMI AUDIO IN — For use when connecting a

personal computer or a DVI device with analog audio
output. See pages 21 and 24. Also see items 8 and 10 below.

Chapter 2: Connecting your TV

TV upper back panel

Power cord

Cable clamper

TV lower back panel

TV back

Before connecting the external device to the TV, remove the
applicable panel cover by squeezing the tabs in the direction of
the arrow ( ) and pulling the cover.

!¡

#01E_012-014_27HLV95

05.10.6, 10:32 AM

Black