Trango Broadband High Density Mesh System - Manual (Page 37)

HD Mesh Node
Trango Broadband Wireless — High Density MESH page 37
Appendix B Specifications
All specifications apply to HD Mesh Node
HD Mesh Node Enclosure
HD Mesh Box NEMA rated outdoor enclosure
Ratings NEMA 3R / IP42
Dimensions 14 in. × 12 in. × 7 in. (39.3 Ч 34.2 Ч 19.5 cm)
Weight 17 lbs (8 Kg)
Router board 9 Ethernet ports, configurable to either router or bridge ports
PoE board 5 PoE Ports, proprietary for Trango units only
N-type female connector,
360° coverage Omni 8 dBi antenna
2 U-bolts (4 nuts), 2 mounting
brackets, 1 screw kit (4 screws,
4 nuts, 4 washers)
Mounting hardware
kit
N Male connectors 2 N-type connector caps
Cat-5 Strain relief
connectors
6 to 12 mm
Input voltage 90-120 VAC or 210 - 230 VAC*
Power consumption 350 Watts maximum*
Router
9 Auto-sensing ports (10/100/1000 Mbps),
configurable to either router or bridge ports Ethernet ports
DB-9 (RS-232C), standard male DB9
asynchronous serial Port Serial port
Expansion slots 6 MiniPCI Slots (two can be use for two WiFi APs)
64 MB NAND memory chip,
CompactFlash type I/II slot Onboard memory
Temp range -40° F to 140° F (-40° C to 60° C) †