beautypg.com

Texas Instruments TMS320DM6446 DVEVM v2.0 User Manual

Page 42

background image

Installing the Software

4-10

4) Perform the following commands to create a copy of the target file

system with permissions set for writing to the shared area as
. Substitute your user name for . If you
installed in a location other than /opt/mv_pro_5.0, use your location
in the cp command.

host $ cp -a /opt/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/target/*

.

host $ chown -R opt

5) Edit the /etc/exports file on the host Linux workstation (not the

exports file on the target filesystem). Add the following line for
exporting the filesys area, substituting your user name for
. Use the full path from root; ~ may not work for exports
on all file systems.

/home/<useracct>/workdir/filesys *(rw,no_root_squash,no_all_squash,sync)

Note: Make sure you do not add a space between the * and the ( in
the above command.

6) Still as root, use the following commands to make the NFS server

aware of the change to its configuration and to invoke an NFS restart.

host $ /usr/sbin/exportfs -av

host $ /sbin/service nfs restart

Note: Use

exportfs -rav

to re-export all directories. Use

/etc/init.d/nfs status

to verify that the NFS status is running.

7) Verify that the server firewall is turned off:

host $ /etc/init.d/iptables status

If the firewall is running, disable it:

host $ /etc/init.d/iptables stop