Texas Instruments TMS320DM6446 DVEVM v2.0 - Manual (Page 11)

What’s in this Kit?
DVEVM Overview 1-3
1.2 What’s in this Kit?
Your DVEVM kit contains the following hardware items. Section 2.1,
Setting Up the Hardware tells how to connect these components.
❏ EVM Board. This board contains a DaVinci TMS320DM6446 dual-
core device with an ARM9 and C64+ DSP for development of
applications that use both a general-purpose processor and an
accelerated DSP processor.
❏ Hard Disk Drive. The hard drive provided with the EVM is a 2.5"
Spinpoint drive with 40 GB of storage. The drive speed in 5400 RPM
and it has an 8MB cache. The drive is an Ultra ATA 66/100/133 IDE.
Software has been preloaded on this EVM board’s hard disk drive.
❏ CCD Camera. This camera provides NTSC or PAL video imaging for
DaVinci applications.
❏ LCD Display. The LCD display provided with the DVEVM kit has a
5.6" screen and 320x240 pixels. Cables and a power supply are
provided. The NTSC version has a 110 VAC power supply. The PAL
version has a 220 VAC power supply.
❏ PC Desktop Microphone. The microphone provides a way to
capture audio for use by DaVinci applications.
❏ IR Remote Control. This universal remote control is included to
provide a user interface to the demo applications.
❏ Cables. Cables used to connect the EVM board to peripheral
devices and to a host Linux workstation used for development are
provided in the kit.
The DVEVM kit also comes with the following software. Information about
how to use the software components is provided in Chapter 4.
❏ DaVinci Digital Video Evaluation Kit.
❏ TI DaVinci Demonstration Version of MontaVista Linux Pro v5.0
Target
❏ TI DaVinci Demonstration Version of MontaVista Linux Pro v5.0
Tools
❏ A/V Media Clips
❏ Spectrum Digital EVM Tools
❏ SoC Analyzer