beautypg.com

Texas Instruments TMS320DM6446 DVEVM v2.0 User Manual

Page 38

background image

Installing the Software

4-6

4.3.1

Installing the Target Linux Software

This section explains how to install Linux for use on the target board. This
is a demonstration version of MontaVista Linux Pro v5.0.

Note that separate versions of Linux are used by the target and your host
Linux workstation. The following Linux host operating system is tested
with the DVEVM: Red Hat Enterprise Linux v4 (Server Edition).

To install the Linux software, follow these steps:

1) Log in as root on your host Linux workstation. This will allow you to

successfully run the graphical installer to install MontaVista Linux.

2) Execute each of the following bin files (where

#_#_#_#

is the current

version number) from the temporary location that they were copied in
order to extract the installers for the Linux tools, Linux kernel, and the
file system. If a bin file does not run, make sure these files are
executable (use

chmod +x *.bin

).

Instead of the default installation directory, we suggest that you
change the installation directory to /opt/mv_pro_5.0.

host $ ./mvl_5_0_demo_sys_setuplinux.bin

host $ ./mvl_5_0_0_demo_lsp_setuplinux_#_#_#_#.bin

3) After you execute these .bin files, make sure the following files are

located in /opt/mv_pro_5.0 (or in the /mv_pro_5.0 subdirectory of the
directory you chose in place of the default):

■ mvltools5_0_#######.tar.gz
■ DaVinciLSP_#_#_#_#.tar.gz

4) Go to the location where you will unpack the tar files. For example:

host $ cd /opt/mv_pro_5.0

5) Unpack the tar files (as root) by using the following commands:

host $ tar zxf mvltools5_0_#######.tar.gz

host $ tar zxf DaVinciLSP_#_#_#_#.tar.gz

This creates the MontaVista directory structure under the
/opt/mv_pro_5.0/montavista/ directory.

Note that unpacking these tar files will overwrite any existing files that
were previously installed.

Note: The LSP shipped with the DVSDK is a multi-platform LSP; it
is not configured for a particular platform. As shipped, this LSP
cannot be used to build the demo or example applications. It must
first be copied to a user area and configured/built for the EVM.
Please see Section 4.5 for instructions.