Texas Instruments TMS320DM6446 DVEVM v2.0 User Manual
Page 29
Running the Demos from the Command Line
Running the Demonstration Software
3-9
The supported video algorithms are MPEG4 (.mpeg4 file extension),
H.264 (.264 file extension) and MPEG2 (.m2v file extension).
The supported audio algorithm is AAC (.aac file extension). The
supported speech algorithm is G.711 (.g711 file extension).
The application runs on the ARM using Linux. The video and audio
signals are passed to decoders on the DSP by the Codec Engine. Shared
memory is used when passing data.
To use this demo from the command line, see Section 3.4, Running the
Demos from the Command Line.
3.3.5
About the Third Party Menu
The Third-Party Menu can be used to add additional demos. See Section
A.2, Putting Demo Applications in the Third-Party Menu.
3.4
Running the Demos from the Command Line
You can run the demo applications from the Linux shell in a terminal
window connected to the EVM board’s serial port. These are the same
demos described in Section 3.2, Starting the Standalone Demos.
1) See Section 2.2, Connecting to a Console Window for instructions
regarding communicating with Linux running on the EVM.
2) Login to the target as root. No password is required.
Table 3–3 IR Remote Buttons for Decode Demo
IR Remote Button
Mode
Action Performed
Up/Down
--
-- no action --
Left/Right
Setup
Select a different file combination
Play or OK
Setup
Begin decode demo
Record
--
-- no action --
Info/Select
Setup
Show / hide block diagram for demo
Info/Select
Run
Toggle information display
Left/Right
Run
Change information transparency level
Pause
Run
Pause demo (press Play to resume)
Stop
Setup / Run
Return to previous screen