Toshiba 51H94 - Manual (Page 78)

(E) 51/57H94
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 78
Chapter 8: Using the TV’s features
Using CableClear ™ DNR (digital
noise reduction)
The CableClear ™ digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal (especially
a Cable channel) or playing back a video cassette or disc
damaged by repeated use.
NOTE: The CableClear DNR feature does not function in
HDMI (DVI), ATSC, IEEE-1394, and digital Cable modes.
To turn on CableClear DNR:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z to highlight the CABLECLEAR DNR field, and
then press • to select AUTO.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
Navigate Select Back Exit DVD RTN
CH RTN EXIT
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanently save the new settings, highlight SAVE and
press ENTER.
NOTE:
• If the current input is Antenna, Video 1, Video 2, or Video 3,
the menu will display the text “CableClear.”
• If the current input is ColorStream HD1 or ColorStream HD2,
the menu will display the text “DNR.”
• If the current input is HDMI or IEEE-1394, the menu will
display the text “DNR” and will be “grayed out” to indicate
that the feature does not function in this input.
To turn off CableClear DNR:
Select OFF in step 3 above.
Using the Night Mode feature
The Night Mode feature can be activated to reduce eye strain
when the room is dark.
To activate the Night Mode:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z to highlight the NIGHT MODE field, and then
press • to select ON.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
Navigate Select Back Exit DVD RTN
CH RTN EXIT
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanently save the new settings, highlight SAVE and
press ENTER.
Note:
• When the Night Mode feature is ON, the CONTRAST setting
(page 77) is not adjustable.
To deactivate the Night mode:
Select OFF in step 3 above.
Adjusting the picture
(continued)
H94(E)077-83(8b-UseTV) 8/3/04, 6:36 PM 78