Toshiba 51H94 - Manual (Page 50)

(E) 51/57/65H93
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 50
(E) 51/57H94
Chapter 6: Setting up your TV
Adjusting the color convergence
(continued)
Setting the AVHD device skip time
When you connect an external AVHD device, such as the
Toshiba Symbio
™ 160HD4 AVHD (audio/video hard drive) to
one of the TV’s IEEE-1394 ports, you can use this feature to set
the number of minutes the device will skip forward or backward
when you press the SKIP buttons.
Note:
• This TV will work best with the Toshiba Symbio™ 160HD4 AVHD,
for recording high definition and standard definition material from
either tuner and for controlling live TV (pause/rewind/fast
forward/skip). When the AVHD is connected to the TV, the
remote control keys (STOP, REW, PAUSE, PLAY, FF) are
automatically activated to allow pausing of live TV.
• When you connect an AVHD (or a D-VHS) device, the
TV Guide On Screen system is automatically configured
to allow recording.
See page 23 for device connection information.
See Chapters 5 and 7 for details about setting up
and using the TV Guide On Screen system.
To set the AVHD device skip time:
1. Press MENU and open the
SETUP menu.
2. Highlight AVHD SKIP
TIME and press ENTER.
3. Press z or y to select the
AVHD skip time and press
ENTER.
7. If both red and blue need adjusting, you will need to
perfrom steps 5 and 6 twice.
8. Press ENTER to display the cursor.
9. Repeat steps 4 to 8 to adjust another position.
10. Press EXIT to close the Convergence menu.
To reset your convergence adjustments:
1. Press MENU and open the SETUP menu.
2. Highlight CONVERGENCE and press ENTER.
3. Press RECALL.
The message, “WARNING: RESETS USER
ADJUSTMENT TO FACTORY SETTINGS” appears.
4. Press ENTER to reset your convergence adjustments to the
factory settings.
Setting the HDMI ™ audio mode
To select the HDMI audio mode:
1. Press MENU and open the SET UP menu.
2. Highlight HDMI AUDIO
SELECTION.
3. Press z or y to select the
HDMI audio mode from
Auto, Digital, or Analog
(Auto is recommended).
See “Connecting an HDMI
or a DVI device to the
HDMI input” on page 19.
Setup
Sleep Timer
Convergence
Navigate Select Back Exit DVD RTN
CH RTN EXIT
On/Off Timer
AVHD Skip Time 15 min
1 min
3 min
5 min
15 min
Installation
HDMI Audio Selection
Side Show Inter val
2 Sec
Setup
Sleep Timer
Convergence
Navigate Select Back Exit DVD RTN
CH RTN EXIT
On/Off Timer
AVHD Skip Time 15 min
Auto
Auto
Digital
Analog
Installation
HDMI Audio Selection
Side Show Inter val 2 Sec
H94(E)044-52(6b-Setup) 8/4/04, 12:41 PM 50