TANDBERG D13841.01 - Manual (Page 37)

5 Configure the Gateway
37
5.2 IP Configuration
To configure the IP settings on the gateway, open
‘
System Configuration - IP
’
as shown in the
figure below.
Configuration
IP Address Assignment
DHCP:
Dynamic Host Configuration Protocol can be selected when a DHCP server is
present. Static IP Address, Static IP Subnet Mask and Static IP Gateway are
ignored because these parameters are assigned by the DHCP server.
Static: If Static assignment is used, the gateway
’
s IP-address and IP-subnet mask must
be specified in the IP-address field.