Telular Wi PATHTM SX7T Terminal and SX7M Modem EVDO - Manual (Page 36)

Status Options
The screens available under the Status menu provide information about your unit. The fields in
the Status screens cannot be edited directly, but they may be changed as a result of other
settings you select using the Telular Device Manager.
Status > Router
The Status > Router page displays most of the unit’s important information.
Firmware Version: Displays the firmware version and release date for your SX7. This
information is useful if you ever need to contact your wireless service provider’s customer
care department or Telular Tech Support.
Current Time/Date: Displays the current time and date as provided by your wireless
service provider’s network.
Router Uptime: Displays how long the unit has been powered on and connected. Router
uptime is reset any time the unit restarts, such as when you have made changes to settings
in the Telular Device Manager and click Restart.
LAN MAC Address: Displays the unit’s Media Access Control (MAC) address.
LAN IP Address and LAN Subnet Mask: Shows the LAN settings as defined on the
Setup > LAN page. See “Setup > LAN” on page 22.
DHCP Server: Shows whether the DHCP server option (see “DHCP Settings” on
page 23) is enabled or disabled.
Current WAN Connection Status: Displays your current connection status: Connected,
Disconnected, or Unknown Connection Problem.
Advanced Data Connection Options
Wi PATH TM SX7 34 User Guide